Be sure, at the beginning of every new working season, the drier is fully lubricated and the grease-container is fully filled at its max level.
The system ensures autonomy of 400 working hours approx on the machines Pto Drive and 600 h. approx on the machines electric drive.
The system operates through the following items:
- An electric grease-pump joined to a grease container of 4 kg capacity. (it. 1)
- A serial of grease dosers/dispensers. (it. 2)
- A sensor to check the effective passing through of the grease (it. 3)
The pump is electrically powered ( 12 or 24 volts) through the same electric circuit mounted on the drier itself.
A rotating scraper, driven by the pump itself, keeps permanently visible the residual level of grease into the container.
An outer grease nipple allows the filling of the container with no need to open it. It can be done by a normal hand grease-gun or with the assistance of an air compressor.
The time-gap between one pumping to the next one is recorded on the electronic circuit of the pump and it can be easily adjusted at any time.
The dosers/dispensers units provide to distribute the full quantity of grease pushed by the pump in the correct proportion to each one of the driving units to be lubricated.
An electric sensor checks the grease has gone trough and provide to stop the pump.
A serial of light signals mounted on the control panel of the drier show permanently what is the operating condition of the pump (on works, on stand-by or in lock-out).
In case of emergency the system always allows to lubricate each element manually or with the assistance of an air-compressor.
The full unit is suitable as a separate kit to be fitted on the machines previously delivered without this facility.
| |